Loading... Please wait...

American Defense RECON 1 Scope Mount 1" Dual QD

  • Image 1
Price:
$210.00
SKU:
ADMRECON1
Ship Weight:
2.00 LBS
Shipping:
Calculated at checkout
Current Stock:
Out of stock; Please call 309-692-5005 to order, thank you.

Sorry but this item is currently unavailable.

Please check back at a later stage.



Product Description

 

American Defense RECON 1 Scope Mount 1" Dual QD

Features

  • Precision machined from 6061 T6 Aluminum
  • Hard coat anodized for a lifetime of performance
  • Fully adjustable to fit both in spec and out of spec rail systems
  • American Defense MFG, LLC. products feature a lifetime warranty
  • Features the Patented QD Auto Lock Lever system

 

The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.

The AD-RECON mount features the Patented QD Auto Lock Lever system which has the following advantages:

  • Does not require proprietary tools for adjustment.
  • Can be adjusted with your finger or a flat blade screwdriver.
  • Lever can be configured to lock to the front or the rear.
  • Superior clamping surface to insure maximum rail engagement

 

Note: The Recon-SL has a lower mounted height than the Recon-S (Family #2626162354)

 

Technical Information
Height: (Top of base to center of scope) 1"=1.020; 30mm=1.110"; 34mm=1.190"; 35mm=1.210"

Weight: 8.4 oz

Distance Between Rings (inside): 2.52"

Distance Between Rings (outside): 4.48"
Operation Instructions:

  • Make sure your firearm is unloaded and the muzzle is pointed in a safe direction
  • Familiarize yourself with the mount and it's parts
  • Unlock the mount. To do this, depress the lock button and move the lever 180 degrees to the unlocked position
  • Install assembly onto rail and move lever to the locked position
  • Check tension to close. Correct tension is the maximum amount of tension you can apply with your hand to move the lever to the closed position. A little judgment and personal preference is needed here.
  • To set the tension for the lever, turn the adjustment screw one click at a time until the proper feel is reached. To tighten, turn the screw clockwise. To loosen the tension, turn it counterclockwise. This may take a few tries to get it exactly where you want it.
  • Torque Ring Screws to 20-25 in/lbs.

Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!